Alpine S2-A55V S-Series 5-Channel Amp / Rux Knob & Alpine S2-SB10V 10" Halo S-Series Preloaded Subwoofer Ported Enclosure

This bundle includes an Alpine S2-A55V S-Series Class-D 5-Channel Amplifier, Hi-Res Certified, 40W x 4 + 200W x 1 @ 4 Ω, 60W x 4 + 300W x 1 @ 2 Ω, an Alpine RUX-KNOB.2 Remote Bass Knob, and an Alpine S2-SB10V 10" Halo S-Series Preloaded Subwoofer Ported Enclosure with ProLink.

1x Alpine S2-A55V S-Series Class-D 5-Channel Amplifier, Hi-Res Certified, 40W x 4 + 200W x 1 @ 4 Ω, 60W x 4 + 300W x 1 @ 2 Ω - (S2-A55V)

Entry-level sound just got elevated with the S2-A55V 5-Channel Amplifier. Its sleek redesign houses an Alpine Class D Amplifier Circuit and is now certified for Hi-Res Audio Playback.

Hi-Res Audio - The Next-Gen Alpine S-Series S2-A55V 5-Channel Amplifier is Hi-Res Audio Certified and able to reproduce up to 40kHz frequency response. This ultra-wide bandwidth coupled with the elevated S-Series design brings out a new benchmark for entry-level performance and price.

Flexible Application - The Next-Gen S-Series Amplifiers now feature a new selectable remote turn-on circuit, a three-position switch that ensures the amplifier turns on and off at the proper times. This design is crucial with newer, in-vehicle technology and allows for proper integration with any factory or aftermarket system.

Power a Full System – With its versatile 5-Channel design, the S2-A55V Amplifier is the perfect solution to power your sound system all in a single chassis. This amplifier delivers crisp and clear audio to up to four speakers plus an additional subwoofer to give your system a complete audio upgrade

MAIN FEATURES
• Hi-Res Audio Certified (Up to 40kHz)
• 5-Channel Amplifier
• Alpine’s Class D Amplifier Circuit
• Two-sided terminal layout
• Built-in Selectable/ Adjustable Crossovers
• Optional Remote Bass Knob Compatible (required RUX-KNOB.2 or RUX-H01, sold separately)

TECH SPECS
• Power Rating: 14.4V, < 0.1% THD +N
• Power Output: 40W x 4 + 200W x 1 @ 4Ω, 60W x 4 + 300W x 1 @ 2Ω
• Bridged Power: 120W RMS x 2 @ 4Ω
• S/N Ratio: >83dB
• Frequency Response: 20Hz – 40kHz
• Damping Factor: >100

WHAT’S IN THE BOX
• 1 S2-A55V 5-Channel Amplifier
• 2 Connection end covers w/4 attachment screws
• Owner’s Manual
• “Birth Sheet” that certifies by measurement the actual power of the amplifier in the box
• 4 Self-tapping screws
• 1 Hexagon wrench
• Alpine Registration Card
• Alpine Limited Warranty Sheet
• Tips sheet for power supply wire connection

1x Alpine RUX-KNOB.2 Remote Bass Knob - (RUX-KNOB.2)

The optional RUX-KNOB remote bass control knob plugs right in to the MRX-M50, MRX-M100, MRX-V60, PDX-M12 and PDX-M6 mono models for quick direct subwoofer control to make bass adjustments on the fly.

Compatible Models
The RUX-KNOB is specifically designed as the controller for use with any of the following PDX Amplifiers: MRX-M50, MRX-M100, MRX-V60, PDX-M12, and PDX-M6.

From the Inside
With the RUX-KNOB, get full control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.

Multiple Amp Control
Yes, there is a way to control multiple amps from just one RUX-KNOB controller – with the use of simple telephone cord adapters (which are readily available at many retailers).

1x Alpine S2-SB10V 10" Halo S-Series Preloaded Subwoofer Ported Enclosure with ProLink - (S2-SB10V)

Double The Fun -
Alpine has been pumping out great sound for over 40 years, and now their Halo Series subwoofer enclosures make it easier to add more bass to your system. You'll get the low end you're looking for from one box, but when you want to expand your system, you can add a second enclosure and the optional linking kit to create a single two-speaker system with double the impact.

Dishing It Out -
The S2-SB10V comes loaded with Alpine's S2-W10D4 subwoofer wired for 2-ohm impedance. The sub's Kevlar-reinforced cone and Santoprene surround give you solid bass response at power levels up to 600 watts RMS. The ported enclosure is tuned to 36 Hz to maximize performance.

Getting It Together -
Two S2-SB10V enclosures can be linked using Alpine's KTX-H10 linking kit (sold separately). Heavy-duty steel front and rear linking brackets connect the enclosures for a compact, sturdy dual-subwoofer solution. The silver linking brackets match the enclosure trim for a neat, coordinated look.

Features -
• 10" ported subwoofer enclosure
• loaded with Alpine's S2-W10D4 subwoofer
• linkable to second S2-SB10V enclosure with linking kit (sold separately)
• Kevlar-reinforced pulp cone with Santoprene rubber surround
• power handling: 600 watts RMS
• frequency response: 28-200 Hz
• 2-ohm impedance
• dimensions: 16"W x 12.75"H x 15"D
• warranty: 1 year

Specifications -
• Driver: Single 10"
• Impedance: 2Ω (dual 4Ω voice coils paralleled)
• Power Handling: 600W RMS
• Enclosure: Ported
• Frequency Response: 28-200Hz
• Port Tuning: 36Hz
• Dimensions: W = 16.0", H = 12.750", Depth = 15.0"