Alpine S2-A60M S-Series Class-D Amp Rux Knob & (2) SS-SB10 Single 10” S-Series Shallow Preloaded Subwoofer Enclosure

This bundle includes an Alpine RUX-KNOB.2 Remote Bass Knob, an Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 600W RMS at 1 & 2-Ohm, and 2x Alpine SS-SB10 Single 10” S-Series Shallow Preloaded Subwoofer Enclosure.

1x Alpine RUX-KNOB.2 Remote Bass Knob - (RUX-KNOB.2)

The optional RUX-KNOB remote bass control knob plugs right in to the MRX-M50, MRX-M100, MRX-V60, PDX-M12 and PDX-M6 mono models for quick direct subwoofer control to make bass adjustments on the fly.

Compatible Models
The RUX-KNOB is specifically designed as the controller for use with any of the following PDX Amplifiers: MRX-M50, MRX-M100, MRX-V60, PDX-M12, and PDX-M6.

From the Inside
With the RUX-KNOB, get full control over your PDX-M6 or PDX-M12 amplifier, conveniently from inside the car. With the RUX-KNOB installed inside the vehicle cabin, easily adjust the bass gain of your amp while seated inside.

Multiple Amp Control
Yes, there is a way to control multiple amps from just one RUX-KNOB controller – with the use of simple telephone cord adapters (which are readily available at many retailers).

1x Alpine S2-A60M S-Series Class-D Mono Subwoofer Amplifier, Hi-Res Certified, 600W RMS at 1 & 2-Ohm - (S2-A60M)

Reliable Performance and Value-Oriented Products -
Three new S-Series amplifiers join the S-Series family, known for reliable performance and value-oriented products. All three S-Series amps (mono, 4-channel and 5-channel) contain technology currently implemented in R and X-Series models. The S-Series amps feature attractive prices and are designed to perform perfectly with the existing S-Series speakers.

Allows High Power Output -
Compact and Powerful: the new digital amplification circuit allows high power output while keeping a small footprint. The S-A60M measures just 204mm in width x 204mm in length for easy installation in virtually any vehicle.Along with Alpine’s new intelligent amplifier platform, the new S-Series amplifiers feature an improved heat sink and protection circuit design that eliminates thermal shut-down, for dependable music playback.

Specifications -
• Power Requirements: 14.4 V.DC (9 - 16 V allowable)
• Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V
• High Level Input with automatic power on
• Cable size: Power Cable AWG 4, SPK Cable AWG 8
• Frequency Response (+0, -3dB: 1W into 4 ohms): 10Hz - 400Hz
• THD+N (@ 10W into 4 ohms): <0.03%
• THD+N (@ 50W into 4 ohms): <0.08%
• Damping Factor: >1000
• Signal to Noise (@ 50 Watts into 4 Ohms): >105dB
• Weight: 1.9 kg

Features -
• Amplifier Type: Class-D (Digital)
• Channel Design: Mono Channel
• Thermal Management Control
• Top Mounted LED Power/Status Indicator
• Speaker Level Input with remote turn on
• Crossover: Adjustable Low-pass (LPF)
• Gain Control: Adjustable
• Bass EQ
• Bass Control: Remote Bass Control (RUX-KNOB2) Ready

2x Alpine SS-SB10 Single 10” S-Series Shallow Preloaded Subwoofer Enclosure - (SS-SB10)

With an ultra-shallow enclosure design and powerful sound output, the 10” S-Series Shallow Preloaded Subwoofer Enclosures give you the best of both worlds in size and sound

DESIGNED FOR TIGHT SPACES
Now you don’t have to choose between bass and space! Alpine’s 10” S-Series Shallow Preloaded Subwoofer Enclosure measures at a minimal 4.5” deep to deliver clean and reliable bass performance in most vehicle applications.

POWERFUL PERFORMANCE
The SS-SB10 features a 2” voice coil inside of a lightweight yet powerful neodymium magnet for up to 300W RMS of power handling. This combined with a front-mounted magnet motor allows the enclosure to have an extremely shallow footprint while maintaining powerful bass performance.

ADJUSTABLE MOUNTING OPTIONS
Four adjustable, foam-padded steel mounting brackets allow for flexible installation in many areas and vehicle types, while the foam reduces vibration during play for optimized performance

PRECISE BASS CONTROL
Alpine’s Gen2 DD-Linear Magnetic Circuit technology, a compact and efficient dual-gap voice coil structure, allows for better control over the motor, resulting in 22mm of peak-to-peak linear excursion for maximized output.

FEATURES
• Preloaded 10” Shallow Subwoofer
• Optimal Sealed Cabinet Quality
• Neodymium Magnet
• Front-Mounted Neodymium Magnet
• Alpine Gen2 DD Linear Magnetic Circuit
• Rugged Polymer Enclosure Cabinet
• Adjustable, foam-padded mounting brackets for flexible installation and reduced vibration

What's in the Box:
Sealed Cabinet with (1) 10” S-Series Shallow Subwoofer
(x4) Mounting Brackets
Owner’s Manual
Warranty Information
Online product registration information 

TECH SPECS
• Dimensions: 18.5” (W) x 4.5” (H) x 12.5” (D)
• Power Handling: 300W RMS
• X-Max: 11mm 1-Way Linear
• Nominal Impedance: 2Ω
• Frequency Response: 35Hz - 200Hz
• Copper Voice Coil: 2”
• Single 2 Ohm Voice Coil for a 2 Ohm load (compatible with S2-A55V, KTA-200M, or KTA-30MW Amplifiers)